Description
Name | Status | Price, $ |
---|---|---|
NetPing 8 IP PDU GSM3G R8 |
End of life |
574 |
General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use. |
NetPing 8 IP PDU allows remote turning on, turning off and restarting the equipment by managing 100V … 240V AC, 50/60 Hz sockets, as well as to measure the active power consumption for each outlet and automatically switch the power supply input to the backup one.
Modifications
Name |
SMS notifications and management |
Input lines |
Output lines |
IO lines |
Number of 1-wire ports |
Ethernet port |
NetPing 8 IP PDU GSM3G R9 |
3G GSM modem |
6 |
2 |
― |
4 |
1 х 10/100-BASE-TX |
NetPing 8 IP PDU GSM3G R8 |
3G GSM modem |
― |
― |
4 |
2 |
1 х 10/100-BASE-TX |
NetPing 8 IP PDU ETH R9 |
― |
6 |
2 |
― |
4 |
1 x 10/100 BASE-TX |
NetPing 8 IP PDU ETH R8 |
― |
― |
― |
4 |
2 |
1 x 10/100 BASE-TX |
Applicable solutions:
- Reload modems, access points, switches, routers, servers and other computer equipment that freezes with no need to access it physically. If a network is unavailable, this operation can be fulfilled via an SMS command;
- Remote turning on/turning off additional computer equipment. This allows to save electricity and reduce equipment wear out, because its work is required sometimes or in certain periods of time;
- Switch to a backup power supply input. Switching to a backup input can be fulfilled remotely by a command automatically, when a voltage disappears on the main input;
- Remote management of air conditioners, ventilation systems and climate control systems. Connected sensors allow current situation surveillance, and a remote 100V … 240V AC, 50/60 Hz sockets management allows turning on a necessary system with no physical presence on an object, including automatic mode.
Device Capabilities
Be notified
|
Use web interface from any device
|
Power up with remote control and automation
|
Enterprise-level reliability
|
Support & Warranty
|
Features Included
Remote management of device sockets via the Ethernet/Internet networkEach output socket of NetPing rack power distribution unit can be remotely switched on/switched off/reloaded. Sockets can be managed through a built-in web interface, with the help of any browser or using SNMP commands. |
Sockets remote management via SMS messagesAny socket of NetPing rack power distribution unit can be switched on/off or reloaded via SMS message. It allows to control a power supply of a connected device even when the Ethernet/Internet network is down or unavailable. |
A watchdog for automatic reloading of an external equipmentIf any external device, a router or an access point freezes sometimes, NetPing rack power distribution unit can automatically reload these devices. To do this, it constantly inquires indicated IP addresses by the ping protocol. If it gets no response, it will automatically reload a connected device by turning off and turning on its power supply. |
Switching on/off sockets on a scheduleNetPing rack power distribution unit can switch on and off a voltage on its built-in sockets on its own on a weekly schedule, switch on/off a voltage several times a day, use a special schedule for holidays. This may be useful for a daily/weekly forced reboot of external devices or for turning off unused equipment in a certain time of a day. |
Automatic switching from a main power supply input to a backup oneWhen a power supply disappears on a main input, NetPing rack PDU can automatically switch all sockets to powering from a backup input. When a power supply on a main input is recovered, NetPing rack PDU can automatically switch sockets to a main input. Switching time between two inputs is several seconds, and for this period of time sockets of a device will be cut off power. |