NetPing External Power Sockets 1-wire 888S0301

The device does not work independently, it can function only with a NetPing host device.

  • A number of output sockets 8 pcs (“computer” type C13 R-30SN).
  • 2 buttons to disconnect the sockets temporary, are programmed via the web interface of a host device.
  • Total output power: 3,5 kW.
  • Power to a channel: 1,5 kW.
  • Operating voltage range: 190…220 V / 50–60 Hz.
  • Short circuit protection: built-in fuse.
  • Host connection interface: 1-wire.
  • Metal case to build in a rack 19′ 1U.
  • Operation temperature range: -30 °С … +50 °С (without moisture condensation, normal air humidity).

Description

Name Status Price, $
NetPing External Power Sockets 1-wire 888S0301
End of life
110

General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use.

NetPing External Power Sockets 1-wire 888S0301 is designed to control the load remotely. In order to control and configure sockets it should be connected to NetPing Monitoring Solution R61 or NetPing Monitoring Solution GSM3G R61 host devices with a 1-wire bus.

You can find more information about the connection and configuration procedures in the User Guide. The information needed for the NetPing External Power Sockets 1-wire 888S0301 configuration, description of indicators, and control buttons are described in the “Firmware Description” for NetPing Monitoring Solution R61 or NetPing Monitoring Solution GSM3G R61 devices.

You can connect no more than only one NetPing External Power Sockets 1-wire 888S0301 to one NetPing device. All device modifications differ only in sockets modifications.

This set does not contain a cable for connecting to a host device (“Cable extender 1-wire, 2m” or similar). The maximum allowable length of this 1-Wire network is limited to 50 meters. When you use NetPing 1-wire hub R912R2, the total length can be increased up to 300 meters.