NetPing Converter 0-20mA 886A02

The adapter is designed to connect analog sensors and is able to measure the flowing current, voltage and resistance.

The range of voltage measurement 0..30 VDC ± 3%;
The range of current measurement -30..30 mA ± 3%;
The range of resistance measurement 0..29999 Ohm ± 3%;
The power supply of the current loop: 12V 100 mA, 24V 30 mA;
Powered from the host device;
Connection interface: 1-wire;
Operating temperature range: -30 C to + 50 C (without moisture condensation, normal air humidity).

Description

Name	Status	Price, $
NetPing Converter 0-20mA 886A02	End of life	51

General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use.

NetPing Converter 0-20mA with an analog interface 0-20mA, the 886A02 model is designed to measure voltage (0..30 VDC ± 3%), flowing current (-30..30 mA ± 3%) and resistance (0..29999 Ohm ± 3%), it is necessary for connecting current sensors, sensors with output voltage or sensors that change their resistance.

If a current loop is connected in reverse, (+) to the RS- contact, the current will go in the “opposite direction” through the sensor shunt connector, and the measured current will be with “a minus” (a negative sign). The error in measuring the voltage on the loop with this connection is not significant, 60mV at maximum measured current 30mA.

It is possible to measure voltage only by connecting it to the RS + terminal. In this case, the current will be 0, the resistance – “infinity”.

The converter is connected to the RJ12 (1-wire) connector of the host device using a cable with an RJ12 cap at the end. The cable also carries power to the sensor.

In a NetPing device, the converter is displayed on the “Analog inputs” page of the web interface.

Please look into the User Guide of the device. The information on connecting the converter is provided in the “User Guide” document of the device to which it is connected. The information about the converter configuration and functionality is specified in the “Firmware Description” document for the device to which it is connected.

It is possible to connect up to four 886A02 converters to one NetPing device.

The converters are delivered with a 2-meter detachable cable with an RJ12 cap at the end. The cable length can be increased by using an extension cable for 1-Wire sensors: Cable extender 1-wire, 10m, Cable extender 1-wire, 5m, Cable extender 1-wire, 2m. The maximum allowed length of a 1-wire network is limited to 50 meters. When you use NetPing 1-wire hub, R912R2, the total length can be increased up to 300 meters.

Specification

Solution
The device is intended for indoor use only	indoor only
The converters are delivered with a 2-meter detachable cable with an RJ12 cap at the end. The cable length can be increased by using an extension cable for 1-Wire sensors: Cable extender 1-wire, 10m, Cable extender 1-wire, 5m, Cable extender 1-wire, 2m.	The maximum allowed length of a 1-wire network is limited to 50 meters.
Formfactor and enclosure	Compact and robust metal case with cuts designed for simple and easy mounting.
Functionalities
Main functionalities
The range of voltage measurement	0..30 VDC ± 3%
It is possible to measure voltage only by connecting it to the RS + terminal.	In this case, the current will be 0, the resistance – “infinity”.
The range of current measurement	-30..30 mA ± 3%
If a current loop is connected in reverse, (+) to the RS- contact, the current will go in the “opposite direction” through the sensor shunt connector, and the measured current will be with “a minus” (a negative sign).	The error in measuring the voltage on the loop with this connection is not significant, 60mV at maximum measured current 30mA.
The range of resistance measurement	0..29999 Ohm ± 3%
Hardware specification
Connectors
Connection to the host device	RJ12 (1-wire) connector
Control and display
Position determined by a NetPing monitoring device	In a NetPing device, the converter is displayed on the “Analog inputs” page of the web interface.
Power supply and parameters
The power supply of the current loop:	12V 100 mA, 24V 30 mA
Power source of the Converter 0-20mA 886A02	powered from the host device
Interface, socket	1-wire interface. RJ12 plug.
Dimensions and logistics parameters
Water proof case	No
Device dimensions (W x D x H)	95 х 28 х 25 mm
Net weight	70 g
Unit packaged weight (transportation weight)	180 g
Device packing containment	main unit, 2m connecting cable with RJ12 connectors at the ends, terminal block STK-15EDGK-3.5-5P, screwdriver
Operating conditions
Ambient air temperature for operation	-30°С … +50°С
Relative humidity	10…90 % (relative humidity has to be not more than 90%, non-condensing)
Operating atmospheric pressure range	84,0 … 106,7 kPa
Storage conditions
Ambient air temperature for storage	-40°С … +70°С
Storage Relative Humidity	10…90 %
Device reliability
Mean time between failures	35 000 h
Device life	At least 3 years
Limited manufacturer’s warranty	3 years from production date
Lifetime technical support	Yes

Documentation and files

Manuals

Technical documentation NetPing Converter 0-20mA 886A02

1 file(s) 0.00 KB

Download

How to Buy?

You can purchase all equipment offered at our website for USD directly from us NetPing east Co Ltd. company or from our official partners. All prices indicated on our website are current ones.

To purchase NetPing devices, email please your request to sales@netpingdevice.com. In the email, indicate please the next:

Name and number of models of devices that you want to purchase. Do not forget to indicate sensors and accessories that are necessary for you.
Company name and a name of the recipient of the parcel with equipment.
Complete mailing address for equipment delivery.
Contacts (e-mail and a phone number).

Afterwards, a sales manager will prepare and send you an invoice in USD to pay the order (the details of our bank account and PayPal account are specified on the invoice). The invoice is valid for 10 days, and if you do not pay it within the specified time frame, the invoice will be canceled. To renew the order, you will need to send a repeat request to a sales manager.

Equipment can be sold for 100% prepayment only!

We make discounts to retail customers. Provided by lot (lot - one time buying/shipment):

Lot total amount > 600 USD → 5% discount.
Lot total amount > 1500 USD → 10% discount.
Lot total amount > 3000 USD → special discount.

We deliver equipment to any country of the world for free. Free delivery of devices without batteries is provided by EMS company. Free delivery of devices with batteries is provided by DHL company.

Customers from Russian Federation are welcome to visit our Russian website www.netping.ru and choose there a more convenient method to purchase our goods.

Compatible devices

Cable extender 1-wire, 10m

Cable extender 1-wire, 2m

Cable extender 1-wire, 5m

NetPing 8 IP PDU ETH R8

NetPing 8 IP PDU ETH R9

NetPing 8 IP PDU GSM3G R8

NetPing 8 IP PDU GSM3G R9

NetPing Monitoring Solution GSM3G R61

NetPing Monitoring Solution R61