Description
Name | Status | Price, $ |
---|---|---|
NetPing Input+Relay R404 |
End of life |
162 |
General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use. |
NetPing Input+Relay R404 is a device for remote microclimate monitoring and controlling a relay in a switch box with equipment. Temperature and humidity sensors allow you to monitor the operating conditions of the equipment. Door and motion sensors are able to warn you about unauthorized entrances. Smoke detectors and liquid sensors will allow you to receive timely notifications about emergency situations. A distinctive feature of this device is a compact plastic case on a DIN rail, which is convenient for installation in any limited space of communication boxes. NetPing Input+Relay R404 can be used for remote control over equipment using built-in relays. In some cases, it can automatically take some necessary actions to restore the equipment to optimal operating conditions. For example, if a temperature level goes up, it can turn on a backup air conditioner.
Applicable solutions:
- to monitor physical working conditions of a computer and other equipment, restrict access to boxes with equipment, notify responsible people about some emergency situations;
- to control ventilation systems and microclimate maintenance systems remotely. Connected sensors allow you to monitor a current situation, and the remote control of 220 V sockets using NetPing AC/DIN socket allows you to turn on the necessary system without having a specialist present at the facility, you can also do it in an automatic mode;
- to control barriers and gates remotely. This control is possible both through commands via the Ethernet network and through connected control buttons and sensors;
- to restart servers and computers, simulating pressing a Reset button. You can do it by sending a command from the web interface, SNMP interface or automatically if specified IP addresses do not respond to the device.
Device Capabilities
Be notified
|
Easy to Integrate with Monitoring Systems
|
Set it up With Web Interface
|
Control Equipment
|
Built to be Reliable
|
Friendly & Secure
|
Support & Warranty
|
Place it into the DIN rail
|
Features Included
The device works 24 hours, 7 days a week, without freezingThe device was designed for continuous operation in an unattended room in a 24/7 operating mode. A built-in power supervisor protects the device from freezing when there are voltage surges. We do not implement third-party resource-intensive operating systems into the device, we write the whole code on our own, and it is optimized as much as possible for this functionality. |
A built-in webserverThe configuration and management of the device are carried out via a browser. You do not need any special software. It works in any OS (Windows, Linux, Mac). |
Connection to the Ethernet network, a static IP addressThe device is connected to an ordinary office Ethernet network, to any free Ethernet port on the switch. If you publish the IP address of the device on the Internet, you can control the sockets of the device from anywhere in the world. |
Authorization and access restrictionAccess to the web interface of the device is protected by a user-configurable login and password. In order to get to the web interface of the device, you need to log in. In addition, you can restrict access to the device, leaving the ability to access only from a specific IP subnet. |
SNMP supportSNMP protocol is widely used in systems for collecting information about network equipment. The device supports commands for managing and receiving information from sensors via the SNMP protocol. The device easily integrates with such network monitoring systems as Zabbix, PRTG Network Monitor, OpenNMS, Nagios, Cacti, The Dude, Monit, and similar ones, which receive information about the status of sensors connected to the device via the SNMP protocol. |
Syslog supportThis protocol, together with the special software on the server, can be used to collect text logs (logs) of the operation of various devices in the network including NetPing devices. This can be very useful for collecting and analyzing statistics. |
URL-encoded commands supportThe device supports sockets control and receiving information from sensors using special HTTP commands. These commands allow you to control the device from any web page developed by the user including those taken from any mobile application. |
Firmware updatingThe device supports firmware update via the device web interface. We periodically release firmware updates. They are free. |
Non-volatile event logAll events (switching devices on and off, information from sensors) are stored in the non-volatile memory. The information will be stored even in case of a power failure. |
Time synchronization with NTP serversThe device does not have a built-in non-volatile clock, that is why it uses constant synchronization with time sources on the Internet (NTP servers). The synchronization with accurate time sources is essential for the “Schedule” function to work and for the correct timestamps in the device event log. |