NetPing Monitoring Solution GSM3G 72R11

NetPing Monitoring Solution GSM3G 72R11
NetPing Monitoring Solution GSM3G 72R11

This device is for remote monitoring of sensors via the Ethernet/Internet network. It allows receiving information about the status of sensors and notifications about sensor triggering remotely.

  • A metal case for mounting on a 19′ 1U rack.
  • 1-Wire sensors support.
  • 12 IO lines for connecting external sensors and controlling external devices.
  • An analog input 0–30 mA, 0–30 V, 0–30 kOhm.
  • Two built-in low voltage relays.
  • Built-in GSM3G modem.
  • 2 х 10/100-BASE-TX Ethernet ports.

Description

General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use.

NetPing Monitoring Solution GSM3G 72R11 is a device for remote microclimate monitoring in a server room. Temperature sensors, humidity sensors, and quality monitoring sensors allow monitoring the operating conditions of equipment in a server room. Door metal sensors, PIR detectors will give notice of unauthorized access to the server room. Smoke detectors and liquid sensors will allow receiving timely notifications about any emergency situations.

In some cases, NetPing Monitoring Solution GSM3G 72R11 can take necessary action automatically to restore equipment to optimal operating conditions.

A key factor for the continuous operation of equipment in the server room is the monitoring physical conditions of this equipment. If you install NetPing Monitoring Solution GSM3G 72R11 in your server room, you can always be sure that the operating conditions of your equipment are optimal!

Applicable solutions:

  • monitoring physical conditions of server and network equipment in real-time;
  • restrictions of access to cabinets and boxes with equipment;
  • monitoring and control of the availability of power supply;
  • notifications of responsible people about emergency situations (email, SNMP TRAP, local notifications);
  • manual and automatic remote control of ventilation systems and microclimate maintenance systems (maintaining a certain temperature);
  • manual and automatic remote control by means of external plug-in power sockets NetPing AC/DIN to turn on, turn off or reboot frozen equipment;
  • integration with a central monitoring system for network and server infrastructure (Zabbix, PRTG Network Monitor, Nagios, and so on).

Scheme for connecting sensors to the NetPing Monitoring Solution GSM3G 72R11 device

Device Capabilities

Be notified

  • Information about the status of sensors is available through the web interface
  • Email notifications
  • SMS notifications
  • Email notifications about events
  • Supercapacitor for a notification system
  • SNMPv .2 trap
  • SYSLOG notifications

Use web interface from any device

  • configuration
  • sensor monitoring
  • notification and alarm
  • scheduler
  • watchdog
  • NTP-time
  • firmware update
  • event log

Power up with remote control and automation

  • Web interface
  • URL-encoded commands
  • SNMP v.1 control
  • LOGIC rules
  • Scheduler for connected devices
  • Watchdog over ICMP to react on changed conditions

Enterprise-level reliability

  • External battery support for uninterrupted operation
  • Internal supercapacitor to keep notifications flow up to 6 minutes when all other power sources are lost (in some models)
  • Designed and built for uninterruptible operation in 24/7 unattended mode

Support & Warranty

  • 24 month worldwide warranty
  • Lifetime professional support
  

Features Included

SNMP support

SNMP protocol is widely used in systems for collecting information about network equipment. The device supports commands for managing and receiving information from sensors via the SNMP protocol. The device easily integrates with such network monitoring systems as Zabbix, PRTG Network Monitor, OpenNMS, Nagios, Cacti, The Dude, Monit, and similar ones, which receive information about the status of sensors connected to the device via the SNMP protocol.

Automatic management of external devices via SNMP

Logic rules built in the devices allow you to control other NetPing devices over the network by sending them an SNMP-set command when a condition is triggered. For example, this can be useful to turn on an indication/notification in another building when a sensor is triggered in a server room. It doesn’t matter where the device with the sensor is or where the display device is: if they have a network connection, the command will be executed.

Automation and execution of logic rules (LOGIC)

The device allows you to set some logical rules that will be executed automatically. For example, when a temperature parameter on a temperature sensor is exceeded, it can turn on the voltage, turn on the warning siren or indicator light, and when the temperature returns to normal, it can turn off the notification automatically. These rules make it possible to implement the simplest automation systems on the basis of the device.

Non-volatile clock and time synchronization with NTP

In order to execute commands at a strictly defined time (“Schedule” module), it is very important that the clock on the device does not go astray. Timestamps are also used for log entries. The device has both its own built-in non-volatile clock and the ability to synchronize automatically with an external time server using the NTP protocol.

Using an external battery

The device is equipped with a special terminal for connecting an external battery module (the module must be purchased separately), which allows you to connect an external battery to the device. An external battery can be used to send notifications from sensors in the absence of the main power supply for a sufficiently long period of time (depending on the capacity of this connected battery).

URL-encoded commands support

The device supports sockets control and receiving information from sensors using special HTTP commands. These commands allow you to control the device from any web page developed by the user including those taken from any mobile application.

Syslog support

This protocol, together with the special software on the server, can be used to collect text logs (logs) of the operation of various devices in the network including NetPing devices. This can be very useful for collecting and analyzing statistics.

Non-volatile event log

All events (switching devices on and off, information from sensors) are stored in the non-volatile memory. The information will be stored even in case of a power failure.

Connecting a sensor adapter to an analog interface

It allows you to connect analog sensors that transmit a signal by changing the flowing current, voltage, or resistance. It can be used for any compatible sensors – in-house or 3rd party.

Specification

Solution

General usage conditions

for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing)

Indoor/outdoor

indoor only

Built-in 3G GSM modem for SMS management and notification

Yes

Max length of the sensor loop to the device

50 m for 1-wire, 100m for discrete sensors using cable with cross-section not less than AWG 21

Form factor and mounting requirement

19′ 1U rack mounted (standalone is possible)

Case material

Metal, black

Device control interface

HTTP API, SNMP, SYSLOG, SMS

Fanless solution

Yes – passive cooling

Traffic encryption

Not supported

Functionalities

External sensors (sold separately, please check Sensors and accessories)

Remote control via web interface

configuration, sensor monitoring, notification and alarm, scheduler, watchdog, NTP-time, firmware update, event log

Remote monitoring of temperature

up to 8 sensors

Remote monitoring of relevant ambient humidity

up to 4 sensors

Converter of analog sensors

Yes, 3×1-wire converters

Power quality monitoring sensors

Yes, up to 3×1-wire sensors

Remote monitoring of sensors “dry contact”

up to 12 sensors

Door sensors

up to 12 sensors

Leakage sensors

up to 12 sensors

1-wire sensors support

Yes, 8×1-wire ports

Input-Output lines

Yes, 12 lines

Sensors status integrations via SNMP protocol

Yes

Possibility to deploy and to control external local alarms via two built-in low voltage relays

Yes

Notifications

Displaying information about the status of sensors through the web interface built into the device

Yes

Email notifications

Yes

SMS notifications

Yes

Email notifications about events on sensors

Yes

Supercapacitor for a notification system

Yes

SNMP trap

Yes, SNMP Trap v1, 2

SYSLOG notifications

Yes

Control and administration of device

Remote control via web interface

configuration, sensor monitoring, notification and alarm, scheduler, watchdog, NTP-time, firmware update, event log

URL-encoded commands

Yes

SMS control

Yes

SNMP control

SNMP v1

Remote temperature control

Yes

Others

Syslog support

Yes

Get time from NTP

Yes

Internal log

Yes

LOGIC rules support

Yes

Built-in GSM modem model

Neoway N51-WW. UMTS: B1, B2, B5, B8. GSM/GPRS: 850/900/1800/1900 MHz

Hardware specification

Connectors

Ethernet port

 2 x 10/100 BASE-TX

RS-485 port

Yes

IO (input-output) lines for connecting external sensors and controlling external devices

12

Relay

2xRelays changeover contact, DC 30V, 2А

Control and display

Power LED indicator

Yes

Reset button

Yes

Power supply and parameters

Electric power (main Input)

100 … 250V 50/60 Hz

Power plug

Euro plug, detachable power cord 1.8 meter

Power consumption, by a unit itself

13 W

Radio frequency

Built-in GSM3G modem

Yes

GSM antenna

Antenna ADA-900M-SMA-3,0m (Freq: 900/1800Mhz; a cable RG174 3m; SMA connector; Antenna height 85mm; VSWR<= 1.5; Input resistance 50 Ohm; Maximum power 60W; Gain 3dBi; Vertical polarization)

Dimensions and logistics parameters 

Water proof case

No

Device dimensions (W x D x H)

320 х 145 х 45 mm

Package box dimensions (W x D x H)

499 х 243 х 63 mm

Net weight

788 g

Unit packaged weight (transportation weight)

1 472 g

Device packing containment

main unit, GSM antenna, power cable C13-CEE7 1.8m, hangers for fastening 2 pcs, fasteners for hangers 4 pcs, a screwdriver, brochure, packaging

Operating conditions 

Outdoor / indoor usage restriction

For indoor use only

Ambient air temperature for operation

-30°С … +50°С

Relative humidity

5…95 % (relative humidity has to be not more than 80% while the ambient air temperature is 25°С exact, non-condensing)

Operating atmospheric pressure range

84,0 … 106,7 kPa

Storage conditions

Ambient air temperature for storage

-40°С … +70°С

Storage Relative Humidity

5…95 %

Device reliability

Mean time between failures, MTBF (controllers)

27 000 h

Estimated life expactancy of the product

At least 3 years

Limited manufacturer’s warranty

3 years from production date

Lifetime technical support

Yes

Documentation and files

Manuals

Firmware

Icon

DKSF_72.1.1.E-3.NPU

1 file(s) 156.08 KB
Download

Certificates

Additional technical files

How to Buy?

You can purchase all equipment offered at our website for USD directly from us NetPing east Co Ltd. company or from our official partners. All prices indicated on our website are current ones.

To purchase NetPing devices, email please your request to sales@netpingdevice.com. In the email, indicate please the next:

  • Name and number of models of devices that you want to purchase. Do not forget to indicate sensors and accessories that are necessary for you.
  • Company name and a name of the recipient of the parcel with equipment.
  • Complete mailing address for equipment delivery.
  • Contacts (e-mail and a phone number).

Afterwards, a sales manager will prepare and send you an invoice in USD to pay the order (the details of our bank account and PayPal account are specified on the invoice). The invoice is valid for 10 days, and if you do not pay it within the specified time frame, the invoice will be canceled. To renew the order, you will need to send a repeat request to a sales manager.

Equipment can be sold for 100% prepayment only!

We make discounts to retail customers. Provided by lot (lot - one time buying/shipment):

  • Lot total amount > 600 USD → 5% discount.
  • Lot total amount > 1500 USD → 10% discount.
  • Lot total amount > 3000 USD → special discount.

We deliver equipment to any country of the world for free. Free delivery of devices without batteries is provided by EMS company. Free delivery of devices with batteries is provided by DHL company.

Customers from Russian Federation are welcome to visit our Russian website www.netping.ru and choose there a more convenient method to purchase our goods.

Compatible devices

Cable 4 extender, 4m Cable 4 extender, 4m
Cable extender 1-wire, 10m Cable extender 1-wire, 10m
Cable extender 1-wire, 2m Cable extender 1-wire, 2m
Cable extender 1-wire, 5m Cable extender 1-wire, 5m
FLWS-60BSL
GLS Humidity sensor 1-wire (HS) GLS Humidity sensor 1-wire (HS)
NetPing 1-wire hub R912R2 NetPing 1-wire hub R912R2
NetPing AC/DIN NetPing AC/DIN
NetPing Converter 0-20mA 886A02 NetPing Converter 0-20mA 886A02
NetPing External Power Sockets 1-wire 888S0301 NetPing External Power Sockets 1-wire 888S0301
NetPing External Power Sockets 1-wire 888S0401
NetPing Power Quality Monitoring Sensor 1-wire 910S21
NetPing Supply Voltage Sensor 995S2 NetPing Supply Voltage Sensor 995S2
PIR DETECTOR (mod.M105-1E) PIR DETECTOR (mod.M105-1E)
Temperature sensor 1-wire, (THS) Temperature sensor 1-wire, (THS)
VT592 Water cable monitor VT592