Water cable monitor VT592

Water cable monitor VT592 is designed to work in conjunction with the WLC10 leak cable. The ability to connect the sensor to the IO line makes it easy to integrate it into almost any system built on NetPing power monitoring and management devices.

  • Operating temperature range: -10°C … 100°C.
  • Operating humidity range: 10% … 90% (non-condensing).
  • Triggering time: up to 15 seconds.
  • A compact plastic case with a hole for mounting.
  • Sensor of the “dry contact” type.
  • A power supply of a sensor is 5V.

Description

Name Status Price, $
Water cable monitor VT592
End of life
55

General usage conditions - for industrial and commercial usage in conditions of high humidity (0-95%, non-condensing). The device is not intended for domestic use.

Water cable monitor VT592 is working only in conjunction with the WLC10 leak sensing cable and is designed to detect liquid due to a leak sensing cable connected to it, including in small volumes — up to a few drops. In comparison with the point leak sensor, the VT592 with a sensing cable WLC10 allows you to create a complex system for detecting leaks around the perimeter and, as a result, preventing damage associated with flooding of premises and equipment.

Water cable monitor VT592 is compatible with devices for monitoring the microclimate of server rooms and remote power management devices NetPing and with other equipment that monitors the status of contacts (closed/open, i.e. the so-called “dry contact”).

There are many ways for using this sensor together with a leak sensing cable WLC10, for example, to lay it under the raised floor of a server room, that will allow it to catch even the slightest leak that has fallen under the floor:

Another typical way of using the sensor is to put it under the boilers or pipes, which helps to warn about the leakage. Also makes sense the scenario when the cable is laid along the walls around the perimeter of the premises or under windows and air conditioners:

Specification

Solution

The device is intended for indoor use only

indoor only

Formfactor and enclosure

compact plastic case with a hole for mounting

Functionalities 

Main functionalities

Triggering time. It is the maximal time of the sensing system activation from the moment when WLC10 leak sensing cable will touch a conductive liquid (water, alkali) at first until the relay in the VT592 will be activated.

1 second – up to 15 seconds (not more)

The VT502 cable leak adaptor is connecting WLC10 leak sensing cable one side, and devices for monitoring the microclimate of server rooms and remote power management from the range of NetPing solutions at the other.

Yes

The VT502 cable leak adaptor is compatible with other equipment that monitors the status of contacts (closed/open, i.e. the so-called “dry contact”).

Yes

Installed in conjunction with WLC10 leak sensing cable, the system senses water intrusion, triggers an alarm, or sends a signal to a monitoring controller.

Yes

Hardware specification

Connectors

by RJ11 (4p4c) to WLC10 leak sensor cable

Yes

Power supply and parameters

Sockets

RJ11 / RJ12, “dry contact” type

Dimensions and logistics parameters

Device dimensions (W x D x H)

20 х 72 х 20 mm

Net weight

75 g

Device packing containment

adaptor 1 pc, connecting cable 1 pc

Operating conditions

Ambient air temperature for operation

-10°С … +100°С

Relative humidity

10…90 % (relative humidity has to be not more than 90%, non-condensing)

Operating atmospheric pressure range

84,0 … 106,7 kPa

Storage conditions

Ambient air temperature for storage

-40°С … +70°С

Storage Relative Humidity

10…90 %

Device reliability 

Mean Time Between Failures, MTBF

35 000 h

Estimated life expactancy of the product

At least 3 years

Limited manufacturer’s warranty

3 years from production date

Lifetime technical support

Yes

Documentation and files

How to Buy?

You can purchase all equipment offered at our website for USD directly from us NetPing east Co Ltd. company or from our official partners. All prices indicated on our website are current ones.

To purchase NetPing devices, email please your request to sales@netpingdevice.com. In the email, indicate please the next:

  • Name and number of models of devices that you want to purchase. Do not forget to indicate sensors and accessories that are necessary for you.
  • Company name and a name of the recipient of the parcel with equipment.
  • Complete mailing address for equipment delivery.
  • Contacts (e-mail and a phone number).

Afterwards, a sales manager will prepare and send you an invoice in USD to pay the order (the details of our bank account and PayPal account are specified on the invoice). The invoice is valid for 10 days, and if you do not pay it within the specified time frame, the invoice will be canceled. To renew the order, you will need to send a repeat request to a sales manager.

Equipment can be sold for 100% prepayment only!

We make discounts to retail customers. Provided by lot (lot - one time buying/shipment):

  • Lot total amount > 600 USD → 5% discount.
  • Lot total amount > 1500 USD → 10% discount.
  • Lot total amount > 3000 USD → special discount.

We deliver equipment to any country of the world for free. Free delivery of devices without batteries is provided by EMS company. Free delivery of devices with batteries is provided by DHL company.

Customers from Russian Federation are welcome to visit our Russian website www.netping.ru and choose there a more convenient method to purchase our goods.

Compatible devices